Artículos

Pulsed 193 nm excimer laser processing of 4H–SiC (0001) wafers with radiant exposure dependent in situ reflectivity studies for process optimization

Numerical modeling for the prediction of microstructure and mechanical properties of quenched automotive steel pieces

3D active mixing of confined power law aqueous polymer solutions: A comparative numerical study

Model based optimization of a resin-impregnated paper air-drying line

Anthocyanins and Total Phenolic Compounds from Pigment Extractions of Non-Native Species from the Umia River Basin: Eucalyptus globulus, Tradescantia fluminensis, and Arundo donax

Thermal behavior of a conical antenna cooled with nanofluid saturated porous media: effects of the cavity’s inclination and aspect ratio

Comparison of three-dimensional flow mixing via pulsation and dynamical stirring: application to the mixing of parallel streams at different temperatures

Impact of channels aspectratio on the heat transfer in finned heat sinks with tip clearance

Experimental study on the thermal control of a roof-top collective building antenna using a porous matrix filled with Water-Copper nanofluid

Experimental study on the influence of a conical cavity’s inclination angle and aspect ratio on thermal behavior of a cone cooled with nanofluid saturated porous media

Possibilities for Exploitation of Invasive Species, Arundo donax L., as a Source of Phenol Compounds

Thalassiosira pseudonana and Skeletonema costatum biomass optimization: Cultivation, harvesting, extraction of oils and biodiesel and pelletization of the residue

Microalgal biomass quantification from the non-invasive technique of image processing through red–green–blue (RGB) analysis

Value-Added Products by Solvent Extraction and Steam Distillation from Elderberry (Sambucus nigra L.)

The reuse of bio-waste from the invasive species Tradescantia fluminensis as a source of phenolic compounds

Seasonal efficiency of a brine-to-water heat pump with different control options according to ecodesign standards

A predictive model for the industrial air-impingement drying of resin impregnated paper

Heat transfer enhancement around a finned vertical antenna by means of porous media saturated with Water-Copper nanofluid

Anthocyanins, phenolic compounds, and antioxidants from extractions of six eucalyptus species

Green filters of Eucalyptus globulus for microalgae harvesting from freshwater reservoir and reuse of biomass harvested for pellet production

Harvesting freshwater algae with tannins from the bark of forest species: Comparison of methods and pelletization of the biomass obtained

Tannins extraction from Pinus pinaster and Acacia dealbata bark with applications in the industry

Water toxicity in reservoirs after freshwater algae harvest

Drop-in performance of the low-GWP alternative refrigerants R452B and R454B in an R410A liquid-to-water heat pump

Surface Tension of N-Methyldiethanolamine in methanol or in methanol aqueous solutions as solvent at temperatures (293.15 to 323.15) K

Energy–efficient mixing generated by prescribed crosswise oscillations of a square prism in highly confined flows

Influence of Microcystis sp. and freshwater algae on pH: Changes in their growth associated with sediment

Hydrothermal carbonization and pellet production from Egeria densa and Lemna minor

B-Learning Tools in Engineering Education

Influence of the refrigerant charge in an R407C liquid-to-water heat pump for space heating and domestic hot water production

Semi-analytical solution of unsteady heat conduction in plain walls with equal surface temperatures: The Transversal Method Of Lines (TMOL) delimited to the “small time” sub-domain

Density, Viscosity and Refractive Index of N-methyldiethanolamine in blends of methanol+water as solvent and their binary systems from T = (293.15 to 323.15) K

Assessing the importance of biomass-based heating systems for more sustainable buildings: A case study based in Spain

An efficient computational technique for the prediction of wire rod temperatures under different industrial process conditions

Ellipsometric analysis of concentration gradients induced in semiconductor crystals by pulsed laser induced epitaxy

Exploitation of Nannochloropsis gaditana biomass for biodiesel and pellet production

Microalgae cultivation and harvesting for bioenergy production

Valorization of Eucalyptus nitens bark by organosolv pretreatment for the production of advanced biofuels

Plain correlation asymptotes to predict the center and mean temperatures and total heat transfer in simple solid objects with uniform surface temperature at limiting small-time conditions

Experimental study of R454B drop-in performance in a R410A liquid-to-water heat pump

Perfomance analysis of a R407C liquid-to-water heat pump: Effect of a liquid-vapor heat exchanger and domestic hot water production

Traceability management systems and capacity building as new approaches for improving sustainability in the fashion multi-tier supply chain

Experimental and numerical study on the flow topology of finned heat sinks with tip clearance

Heat transfer downstream of a 3D confined square cylinder under flow pulsation

Semicontinuous culture of chlorella vulgaris microalgae for wastewater treatment

Modeling and simulation of a zero emission urban bus with battery and fuel cell energy systems under real conditions

Analysis of the impact of different operating conditions on the performance of a reversible heat pump with domestic hot water production

Experimental analysis of R1234yf as a drop-in replacement for R134a in a small power refrigerating system

Numerical modeling of ground thermal response with borehole heat exchangers connected in parallel

Condensation of superheated R134a and R437A inside a vertical tube

A Study on Techniques for Microalgae Separation and Lipid Extraction for Desmodesmus subspicatus

An effective method for harvesting of marine microalgae: pH induced flocculation

Biodiesel Production from Waste Frying Oil by Ultrasound-Assisted Transesterification

Bioenergy Use from Pavlova lutheri Microalgae

Influence of a Combination of Flocculants on Harvesting of Chaetoceros gracilis Marine Microalgae

Harvesting and lipids extraction of Pavlova Lutheri

Freshwater algae competition and correlation between their growth and microcystin production

Bioremediation of wastewater using chlorella vulgaris microalgae: Phosphorus and organic matter

Biofuel and biomass from marine macroalgae waste

Study of influence of pH and salinity on combined flocculation of Chaetoceros gracilis microalgae

Natural convection air flow in vertical upright-angled triangular cavities under realistic thermal boundary conditions

Carbon dioxide absorption into N-methyldiethanolamine aqueous-organic solvents

Efficiency and sustainability through the best practices in the Logistics Social Responsibility framework

Experimental study on the flow regimes past a confined prism undergoing self-sustained oscillations

Thermodynamic and heat transfer analyses for R1234yf and R1234ze(E) as drop-in replacements for R134a in a small power refrigerating system

Comparative study of carbon dioxide absorption in aqueous mixtures of methyldiethanolamine and methanol focusing on the temperature and concentration influence over the absorption rate

Physicochemical characterization of aqueous two-phase systems containing tween20 and sodium salts from T=(288.15 to 318.15) K

Termografía infrarroja en I + Dmonitorización de la temperatura en un proceso de absorción de CO2

Analysis in a test bench for geothermal heat pump with simultaneous production of domestic hot water with heating or cooling and efficiency improvements

Surface tension of three amyl alcohol + ethanol binary mixtures from (293.15 to 323.15) K

Energy optimization of an installation of reversible geothermal heat pump

Applicability of infrared thermography to the study of the behaviour of stone panels as building envelopes

Comparative study about heat transfer during the carbon dioxide absorption in alkanolamines

Electrochemical mass transfer measurements of carbon dioxide in MDEA solutions

Experimental interfacial area measurements in a bubble column

Density, speed of sound, isentropic compressibility and excess volume of binary mixtures of (monoethanolamine + 2-amino-2-methyl-1-propanol), (monoethanolamine + triethanolamine), and (monoethanolamine + N-methyldiethanolamine) at temperatures from (293.15 to 323.15) K

Density, speed of sound, isentropic compressibility and excess volume of binary mixtures of 1-amino-2-propanol or 3-amino-1-propanol with 2-amino-2-methyl-1-propanol, diethanolamine or triethanolamine from (293.15 to 323.15)K

Rheological properties of fruits purees: Effect of cooking

Rheological properties of cooking creams: Effect of freeze-thaw treatment

Local mass transfer measurements in a bubble column using an electrochemical technique

Density and speed of sound of binary mixtures of N-methyldiethanolamine and triethanolamine with ethanol

Effect of temperature on rheological properties of different jams.

Density, viscosity, excess volume and viscosity deviation of three amyl alcohols+ethanol binary mixtures from 293.15 to 323.15 K

Densities and viscosities of aqueous ternary mixtures of 2-(methylamino)ethanol and 3-(ethylamino)ethanol with diethanolamine, triethanolamine n-methyldiethanolamine or 2-amino-2-methyl-1-propanol from 298.15 to 323.15 K

Comparison of rheological behaviour of salad sauces

Rheological behaviour of powered baby foods

Effects of temperature and concentration on carboxymethyl cellulose with sucrose rheology

Densities and viscosities of aqueous solutions of pyrrolidine and piperidine from (20 to 50) ºC

Comparison of rheological behaviour of sweet and salad sauces

Elimination of alcohol by vacuum distillation in ribeiro and albariño wines

Densities and viscosities of ternary systems of water + glucose + sodium chloride at several temperatures

Surface tension of aqueous binary mixtures of 1-amino-2-propanol and 3-amino -1-propanol, and aqueous ternary mixtures of these amines with diethanolamine, triethanolamine and 2-amino-2-methyl-1-propanol from 25 to 50ºC

Polymers in alimentary industrie: properties of the sodium alginate

Problematic of wastewater produced in dry industries and precooked industries

Study of the alcoholic fermentation in wine “albariño”. Influence of the yeast saccharomyces cerevisiae and SO2

Prediction of water activity of osmotic solutions

Liquid-liquid equilibria of the system water + acetic acid + 2-hexanone at 25 ºC and 35 ºC

Densities and viscosities of ternary systems of water + fructose + sodium chloride from 20 to 40 ºC

Water activity in sorbitol or xylitol + water and sorbitol or xylitol+sodium chloride+water systems at 20 and 35 ºC

Conductivity of sodium bis (2-ethylhexyl) sulfosuccinate / isooctane / water microemulsions containing phase-transfer catalysts. 2

Model based in neural networks for the prediction of the mass transfer coefficients in bubble columns. Study in newtonian and non-newtonian fluids

Application of the Danckwerts method in a bubble column effects of surfactants on mass transfer coefficient and interfacial area

Conductivity of sodium bis(2-ethylhexyl)sulfosuccinate/isooctane/water microemulsions containing phase-transfer catalysts. 1